Key Data Set Information | |
Reference year | 2024 |
Name |
|
Technical purpose of product or process | Access roof lights enable fast, safe and easy access to the roof to carry out repair and maintenance works. They illuminate the interior and can be opened to ventilate the room. Access roof lights are designed for uninhabited lofts with the interior temperature similar to the outdoor one. The frame is made of vacuum impregnated wood, while the sash is made of powder coated aluminium profile. The flashing is an integral part of the access roof light. Access roof lights include several product varieties: - WLI is a side hung window. It is equipped with the 4-8-4 (or occasionally 3-8-3) glazing unit. It can be installed in left or right opening version. The applied turn limiter holds the sash stable and prevents against accidental closure. The lower part of the access roof light comes with a specially shaped profile which covers the frame and prevents slipping while getting onto the roof. - WG comes with a top hung structure, while its sash is opened upwards. It is available in two versions: * WGT with a single 4 mm thick glass * WGI with the 3-8-3 glazing unit WGI is equipped with a gas spring which makes opening easier, holds the sash stable and prevents it against accidental closure. - WS features a top hung structure. Semi-circular polycarbonate dome opens upwards up to an angle of 180°. The material used demonstrates increased resistance to weather conditions and provides protection against UV radiation. Available in three different types, depending on the roofing material applied: - WSS with flashing for flat roofing material - WSZ with flashing for corrugated roofing material - WSH with flashing for high-profile roofing material - WGU, WGU-X is a side hung window. It comes with the 3-8-3 glazing unit, a gas spring that holds sash in the open position and a profile that covers the lower part of the frame. WGU-X additionally has a vapour-permeable flashing. - WGB comes with a top hung structure, while its sash is opened upwards. The upper part of the frame is arch-shaped. It is available with the 4-9-4 glazing unit. WGB has a gas spring that makes it easy to lift the sash and holds it in the open position preventing accidental closure. The WGI access roof light sized 46 x 75 cm and WSZ access roof light sized 54 x 75 cm were adopted as representative windows. Composition and percentage of input materials of access roof light WGI and WSZ and packaging materials produced by FAKRO PP Sp. z o.o. Detailed parameters of access roof lights are specified in their Declarations of Performance, which can be downloaded from the FAKRO PP Sp. z o.o. website: www.fakro.com |
General comment on data set | The data selected for LCA analysis originates from ITB-LCI questionnaires completed by FAKRO PP Sp. z o. o. using the inventory data, ITB and Ecoinvent database v. 3.10 and KOBiZE. KOBiZE data is supplemented with Ecoinvent v. 3.10 data on the national electricity mix impact where no specific indicator data is provided. No specific data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. The allocation rules used for this EPD are based on general ITB PCR A v. 1 .6. Production of access roof lights is a line process conducted in the manufacturing plan located in Nowy Sacz (Poland). All impacts from raw materials extraction and processing are allocated in A1 module of EPD. Impacts from the FAKRO production were inventoried on the annual production volume expressed in kg. Water and energy consumption, associated emissions and generated wastes are allocated to module A3. Energy supply was inventoried for whole production process. Packaging materials were taken into consideration. The life cycle analysis (LCA) of the declared products covers: product stage – modules A1-A3, end of life – modules C1-C4 and benefits and loads beyond the system boundary – module D (cradle-to-gate with options) in accordance with EN 15804 + A2 and ITB PCR A v. 1.6. Energy and water consumption, emissions as well as information on generated wastes were inventoried and were included in the calculations. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804 + A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA. |
Copyright | Yes |
Owner of data set | |
Quantitative reference | |
Reference flow(s) |
|
Biogenic carbon content |
|
Time representativeness | |
Data set valid until | 2029 |
Technological representativeness |
Type of data set | EPD | ||||
Subtype | average dataset | ||||
LCA methodology report | |||||
Data sources, treatment and representativeness | |||||
Documentation of data quality management | |||||
Data source(s) used for this data set | |||||
Completeness | |||||
Validation | |||||
| |||||
Compliance Declarations |
Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Data generator | |
Data set generator / modeller |
|
Data entry by | |
Time stamp (last saved) | 2024-10-08T14:17:53 |
Data set format(s) | |
Publication and ownership | |
UUID | 3d715b3c-cbc5-4446-981f-f363f8967a13 |
Date of last revision | 2024-10-08T12:17:07.9812061Z |
Data set version | 00.03.001 |
Registration authority |
ITB-EPD Poland
|
Registration number | 671/2024 |
Owner of data set | |
Copyright | Yes |
License type | Free of charge for all users and uses |
Access and use restrictions | None |
|
Indicators of life cycle