| Key Data Set Information | |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | The life cycle analysis of the declared products covers “Product Stage” A1-A3, “Transport and Installation”,A4-A5, “end of life” C1-C4+D modules in accordance with EN 15804+A2 and actual ITB PCR A (cradle to gate with options). Energy and water consumption, emissions as well as information on generated wastes were inventoried in manufacturing plant (LCI) and were included in the calculation. It can be assumed that the total sum of omitted processes does not exceed 2% of all impact categories. In accordance with EN 15804+A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA. Inputs and processes of product system are presented in Figure 1. |
| Technical purpose of product or process | Aluminium alloy 8079 are characterized by very good ductility due to their finegrained structure. The main alloying elements are iron and silicon, which increase the strength properties relative to pure aluminum while maintaining very good ductility. The 8079 aluminum alloy is used in the food industry. The composition of the charge structure used to produce alloy 8079 (scope 3) is: internal scrap 8079 alloy, primary aluminium, external scrap RSI, AlFe 10 master alloy. Target chemical composition of Aluminium alloy 8079 are presented in Table 1. All additional technical information about the product is available on the manufacturer's website. |
| General comment on data set | The values determined to calculate A1-A3 originate from verified Process LCI inventory data from manufacturing plant. A1 values were prepared considering input products characteristics and are based on Ecoinvent v 3.10 and available supplier EPDs. The energy consumption in production and its impact on the production process were inventoried and calculated. For aluminium, the weighted average carbon footprint declared by suppliers was used. In accordance with Annex E of the EN 15804 + A2, a data quality assessment was performed. For technical representativeness, processes with a quality level of "very good" account for 99% of the value for climate change indicator. For geographical and time representativeness, processes level of "very good" is obtained. The allocation principles used in this EPD are based on the general standards ITB PCR A v. 1.6 and EN 15804+A2. The production of aluminium products is carried out by Gränges Konin S.A. at the production plant located in Konin (Poland) and covers 100% of production. The allocation is made based on the product weight. All predicted impacts from the extraction and processing of raw materials are allocated in module A1 of the LCA. Raw materials for production such as external scrap for remelting, primary aluminium and recycled aluminium are supplied from external suppliers. Impacts from the global linear production of Gränges Konin S.A. are estimated at 100% and have been assigned to the production of aluminium products. Water and energy consumption, related emissions and waste generation are assigned to module A3. Packaging materials are taken into account. It can be assumed that the total sum of omitted processes does not exceed 2% of all impact categories. In accordance with EN 15804+A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Technological representativeness | |
| Type of data set | EPD | ||||
| Subtype | average dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-10-22T10:03:14 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 3efd67f2-7d6f-4d1a-91f2-43b59bc873a5 |
| Date of last revision | 2024-10-22T07:51:51.0833142Z |
| Data set version | 00.03.000 |
| Registration authority |
ITB-EPD Poland
|
| Registration number | 607/2024 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
| |
Indicators of life cycle