Close Go back Collapse all sections
Process Data set: Group of ECO LINE concretes (en) en

A more recent version of this data set exists in the database.

Most recent version of this data set:00.03.001

Key Data Set Information
Reference year 2023
Name
Group of ECO LINE concretes
Use advice for data set The EPD covers the product stage analysis A3, A4 + end of life C and D (“cradle to gate” with options). The selected system boundaries comprise the production of input raw materials’ extraction up to the finished product at the factory gate (ready concrete). The product stage contains: Module A1: extraction and processing of raw materials (ash, sand, gravel, additives, water, and cement) and fuels, Module A2: transportation up to factory gate of raw materials and primary fuels, Module A3: concrete production (mixing). Inputs and processes of product system are presented in Figure 1.
Technical purpose of product or process Concrete is specified and supplied in accordance with EN 206 with Polish amendment PN-B-06265. Concrete is used for site-mixed structures, precast structures and structural precast products in buildings prefabricated structures and structural prefabricated products in buildings and buildings. The product assessed is a specific 1 m3 of mixed concrete, where the constituent proportions are provided in Table 1 based on average values from 8 plants. Ready-mixed concrete is commonly used in construction for: internal and external walls, roofs, foundations, piles, columns, supports, joists and other elements. More detailed information is available in the respective manufacturer's documentation (e.g. product data sheets available on request).
General comment on data set The values determined to calculate A1 (cement) and A3 originate from verified LCI inventory data from cement production plants (ITB-EPD) and 22 concrete production plants. A1 values (raw materials) were prepared considering specific data and Eco invent data for the aggregates and ashes. The allocation rules used for this EPD are based on general ITB PCR A and EN 15804. Each manufacturing plant was subjected to LCI data analysis. The values adopted for the calculations were averaged from 8 plants using a weighted average. As no co-products are produced, the flow of materials and energy and also the associated release of substances and energy into the environment are related exclusively to the concrete mix produced. Cement used is produced in Poland and the weighted average mass of CEM III/A 42,5N-LH/HSR/NA and CEM II A/V 42,5 production was used for allocation. Minimum 99.5% of impacts from the production were allocated to product covered by this declaration. Emissions allocated in cement production are assessed by ITB using EN 15804+A2 (specific EPDs). Calculations for GWP indicator are made considering gross emissions. The indicated gross value includes the CO2 emissions from waste incineration (excluding biomass fraction of fuels). In this assessment, all information gathered from data collection for the production of concrete has been modelled, i.e. all raw materials used, the electrical energy and other fuels used (oil and diesel), use of ancillary materials and all direct production waste. Transport data on input was considered. The machines and facilities (capital goods) required for and during production are excluded, as is transportation of employees. Calculations for GWP indicator are made considering gross emissions. The concrete recipe is based on weighted average data from 8 locations.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 0.0 kg
  • Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until 2028
Technological representativeness

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 183
  • 11.6
  • 2.12
  • 0.0812
  • 0.692
  • 8.12
  • 8.12
  • 0.49
  • -88
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 714
  • 807
  • 30.4
  • 5.66
  • 71.3
  • 566
  • 566
  • 30.2
  • -767
Input
  • 92.7
  • 0.27
  • 0.00297
  • 0.0019
  • 0
  • 0.19
  • 0.19
  • 0.00000607
  • 2.18E+3
Input
  • 3.9E+2
  • 0.00298
  • 0.0000153
  • 0.0000209
  • 0.00000409
  • 0.00209
  • 0.00209
  • 1.59E-7
  • -0.0282
Input
  • 294
  • 0
  • 0.0229
  • 0
  • 6.89
  • 0
  • 0
  • 0
  • 0
Input
  • 8.34
  • 0.102
  • 0.0278
  • 0.000712
  • 0.00322
  • 0.0712
  • 0.0712
  • 0.00439
  • -1.39
Output
  • 1.96
  • 0.905
  • 0.00169
  • 0.00635
  • 0.00876
  • 0.635
  • 0.635
  • 0.0000746
  • -5.34
Output
  • 109
  • 16.1
  • 0.214
  • 0.113
  • 0.162
  • 11.3
  • 11.3
  • 115
  • -149
Output
  • 0.000482
  • 0.0000602
  • 0.0000339
  • 4.23E-7
  • 0.000434
  • 0.0000423
  • 0.0000423
  • 0.00017
  • -0.00202
Output
  • 0.325
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 2.29
  • 0.0025
  • 0.21
  • 0.0000175
  • 3.86E-8
  • 0.00175
  • 0.00175
  • 5.78E-8
  • -0.0104
Output
  • 0.0000163
  • 0.0000202
  • 2.7E-7
  • 1.42E-7
  • 9.2E-10
  • 0.0000142
  • 0.0000142
  • 6.85E-10
  • -0.000963
Output
  • 16.3
  • 0
  • 0.0888
  • 0
  • 0.0056
  • 0
  • 0
  • 0
  • -2.08
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Abiotic depletion potential - fossil resources (ADPF)
  • 712
  • 807
  • 30.2
  • 5.66
  • 63.1
  • 566
  • 566
  • 27.9
  • -766
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.000461
  • 0.000193
  • 0.00000833
  • 0.00000135
  • 0.0000282
  • 0.000135
  • 0.000135
  • 0.00000409
  • -0.0065
Acidification potential, Accumulated Exceedance (AP)
  • 0.513
  • 0.221
  • 0.0196
  • 0.00155
  • 0.129
  • 0.155
  • 0.155
  • 0.0102
  • -0.916
Depletion potential of the stratospheric ozone layer (ODP)
  • 0.00000579
  • 0.0000126
  • 6.44E-8
  • 8.83E-8
  • 9.77E-7
  • 0.00000883
  • 0.00000883
  • 3.68E-7
  • -0.0000041
Eutrophication potential - freshwater (EP-freshwater)
  • 0.0203
  • 0.00365
  • 0.0032
  • 0.0000256
  • 0.00661
  • 0.00256
  • 0.00256
  • 0.000351
  • -0.0332
Eutrophication potential - marine (EP-marine)
  • 127
  • 0.0666
  • 0.00326
  • 0.000467
  • 0.0283
  • 0.0467
  • 0.0467
  • 0.00352
  • -0.0813
Eutrophication potential - terrestrial (EP-terrestrial)
  • 1.53
  • 0.726
  • 0.0246
  • 0.0051
  • 0.309
  • 0.51
  • 0.51
  • 0.0383
  • -1.09
Global Warming Potential - biogenic (GWP-biogenic)
  • 0.506
  • 0.186
  • 0.0533
  • 0.0013
  • 0.0109
  • 0.13
  • 0.13
  • 0.0122
  • -0.00131
Global Warming Potential - fossil fuels (GWP-fossil)
  • 1.6E+2
  • 54.4
  • 1.82
  • 0.381
  • 4.87
  • 38.1
  • 38.1
  • 1.21
  • -21.9
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.0323
  • 0.0213
  • 0.000604
  • 0.00015
  • 0.00131
  • 0.015
  • 0.015
  • 0.00122
  • -0.1
Global Warming Potential - total (GWP-total)
  • 1.6E+2
  • 54.6
  • 1.88
  • 0.383
  • 8.37
  • 38.3
  • 38.3
  • 1.22
  • -21.9
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
Photochemical Ozone Creation Potential (POCP)
  • 0.425
  • 0.222
  • 0.00688
  • 0.00156
  • 0.0812
  • 0.156
  • 0.156
  • 0.0111
  • -0.262
Water (user) deprivation potential (WDP)
  • 51.2
  • 3.73
  • 0.678
  • 0.0262
  • 0.239
  • 2.62
  • 2.62
  • 0.162
  • -56.7

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential Soil quality index (SQP) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential incidence of disease due to PM emissions (PM) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0