Close Go back Collapse all sections
Process Data set: CADEIRA FRAME CHAIRS (en) en

A more recent version of this data set exists in the database.

Most recent version of this data set:00.04.001

Key Data Set Information
Reference year 2020
Name
CADEIRA FRAME CHAIRS
Technical purpose of product or process FRAME CHAIRS CADEIRA Frame versions: 4-leg, chromium plated Glides: plastic or self-leveling or acoustic, for hard or soft surfaces Armrests (optional): integrated with the frame, beech plywood pad Writing tablet (optional): beech plywood - stained, laminated Seat and backrest types: Wooden shell - beech plywood shell Laminated shell – beech plywood shell, covered with laminate Seat pad – beech plywood shell, with polyurethane foam seat pad Seat and backrest pad - beech plywood shell, with polyurethane foam seat pad and backrest pad Upholstered front - beech plywood upholstered with polyurethane foam on front side Fully upholstered - beech plywood upholstered with polyurethane foam on both sides CERTIFICATES GS mark APPLICATIONS Conference rooms, meeting rooms, public areas and as visitor chair in workplaces
General comment on data set The values determined to calculate the LCA originate from verified Nowy Styl Sp. z o.o. inventory data. The data for the processes come from the following databases: Ecoinvent v.3.5, specific EPDs, ELCD, ÖKOBAUDAT, Ullmann’s, ITB-Data. Specific data quality analysis was a part of external ISO 14001 audit. The allocation rules used for this EPD are based on general ITB PCR A. Production of the frame chairs AXO, CADEIRA, CAFE, LEVITATE POLYFOLD, WING II is a line process carried out in five factories of Nowy Styl Sp. z o.o. located in Krosno and Rzepedz (Poland). Allocation was done on product mass basis. All impacts from raw materials extraction are allocated in A1 module of the LCA. 100% of impacts from the line production of Nowy Styl Sp. z o.o. were inventoried and were allocated to the frame chairs production as follows: AXO, CADEIRA, CAFE, LEVITATE POLYFOLD, WING II. Utilization of packaging material was taken into consideration. Module A2 includes transport of raw materials such as wood, polymers (PE, PA, PU, PET), steel elements, papers, additives, ancillary materials and packaging materials from their suppliers to Nowy Styl Sp.z o.o. in Krosno and in Rzepedz. Municipal wastes of factory were allocated to module A3. Energy supply was inventoried for whole factory and was allocated to the frame chairs AXO, CADEIRA, CAFE, LEVITATE POLYFOLD, WING II production. Emissions in the factory are measured and were allocated to module A3. The life cycle analysis of the declared products covers “Product Stage”, A1-A3, C2, C3, C4 and D modules (Cradle to Gate with options) accordance with ISO 14040 and ITB PCR A. The details of systems limits are provided in product technical report. All materials and energy consumption inventoried in factories and were included in calculation. In the assessment, all significant parameters from gathered production data are considered, i.e. all material used per formulation, utilized thermal energy, internal fuel and electric power consumption, direct production waste, and all available emission measurements. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. Machines and facilities (capital goods) required for and during production are excluded, as is transportation of employees.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2025
Time representativeness description "08.06.2020" - "08.06.2025"
Technological representativeness

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 273
  • 3.37
  • 1E+1
  • 0.0822
  • 37.3
  • 0.335
  • -7.57
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 374
  • 50.5
  • 182
  • 1.23
  • 6.99
  • 2.98
  • -102
Input
  • 10.2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 3.18
Input
  • 0.0791
  • 2.52
  • 0
  • 0.0616
  • 0
  • 0
  • 51.9
Input
  • 0.0613
  • 0
  • 0
  • 0
  • 0
  • 0
  • 4.26
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.00548
  • 0.000016
  • 0.193
  • 0.00000182
  • 0.0000125
  • 0.00000274
  • -0.00138
Output
  • 1.75
  • 0.0148
  • 0.18
  • 0.00169
  • 0.26
  • 0.399
  • -0.414
Output
  • 0.00689
  • 0
  • 0
  • 0
  • 0.000048
  • 0.00000801
  • -0.003
Output
  • 0.0784
  • 0
  • 0
  • 0
  • 0.0471
  • 0
  • 0
Output
  • 0.0753
  • 0
  • 3.45
  • 0
  • 4.62
  • 0
  • 0
Output
  • 0
  • 0
  • 0.796
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
  • 355
  • 48.1
  • 173
  • 1.17
  • 8.04
  • 3.62
  • -115
  • 0.00535
  • 0
  • 0.000155
  • 0
  • 0.00000655
  • 0.000002
  • -0.000435
Acidification potential (AP)
  • 0.0979
  • 0.00679
  • 0.0159
  • 0.000301
  • 0.00217
  • 0.00105
  • -0.0166
  • 0.0185
  • 0.00003
  • 0.00272
  • 0.0000532
  • 0.000836
  • 0.000305
  • -0.00337
  • 4.14
  • 0.898
  • 41.8
  • 0.0398
  • 0.527
  • 0.961
  • -10.3
Ozone Depletion Potential (ODP)
  • 0.00000116
  • 0
  • 0
  • 0
  • 4.03E-8
  • 1.04E-8
  • -7.22E-8
Photochemical Ozone Creation Potential (POCP)
  • 0.00824
  • 0.000447
  • 0.00187
  • 0.0000194
  • 0.000301
  • 0.000238
  • -4