Close Go back Collapse all sections
Process Data set: CEMTOR- Hydraulic binders (en) en

Key Data Set Information
Location PL
Geographical representativeness description -
Reference year 2026
Name
CEMTOR- Hydraulic binders
Use advice for data set The life cycle analysis of the declared products covers “Product Stage” A1-A3 modules in accordance with EN 15804 and ITB PCR A (cradle to gate with options). The product is an intermediate component and is used for the production of roads. Energy and water consumption, emissions as well as information on generated wastes were inventoried and were included in the calculation. It can be assumed that the total sum of omitted processes does not exceed 2% of all impact categories. In accordance with EN 15804+A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA.
Technical purpose of product or process CEMTOR Hydraulic Binder is mainly intended for traffic engineering and earthworks, in particular for: - Soil stabilisation - Reinforcement and improvement of the pavement base - Improving soil in embankment layers HRB E 4 CEMTOR 32.5 hydraulic rapid-setting road binder is a factory-produced, ready-to-use binder with properties particularly suitable for preparing base and subbase materials, separating layers, and for use in earthworks, road construction, railways, airports, and other types of infrastructure. Composition Main ingredients: Portland cement clinker (K, 65%), limestone flour (L-LL) Secondary ingredients: calcium sulfate (Cs) as a setting time regulator, ground quicklime (CL-Q), and specially selected inorganic mineral materials. The binder does not contain any by-products of hard coal or lignite combustion. All additional technical information about the product is available on the https://spoiwex.pl/ and catalogues. -
General comment on data set The data selected for LCA originate from ITB-LCI questionnaires completed by Spoiwex Sp. z o.o. and verified during LCI data audit. No data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency is judged as good. The background data for the processes come from the following resources database Ecoinvent v.3.11. Specific (LCI) data quality analysis was a part of the input data verification. Where no background data is available, data gaps were complemented by manufacturer information and literature research. No mass balance approach used. Biogenic carbon content in product is zero. The allocation rules used for this EPD are based on general ITB PCR A. Production of hydraulic binders is a line process executed by of Spoiwex Sp. z o.o. in plant located in Rogowiec and Zory (Poland). Allocation was done on product mass basis. All impacts from raw materials extraction and processing are allocated in module A1 of the LCA . Impacts from the global line production of Spoiwex Sp. z o.o. Water and energy consumption, associated emissions and generated wastes are allocated to module A3. Packaging materials were taken into consideration. 100% materials and 100% energy consumption were inventoried in a factories and were included in calculation. In the assessment, all significant parameters from gathered production data are considered, utilized energy, and electric power consumption, direct production waste, and available emission measurements. The total of neglected input flows per module A1-A3 does not exceed the permitted maximum of 1 % of energy usage and product mass. Tires consumption for transport was not taken into account. It is assumed that the total sum of omitted processes does not exceed 2% of all impact categories. In accordance with EN 15804+A2 machines and facilities (capital goods) required for and during production are excluded, as is transportation of employees.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 0.0 kg
  • Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until 2031
Time representativeness description "2026-08-31" - "2031-08-31"
Technological representativeness
Technology description including background system -

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
Input
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
Input
  • 16.3
  • 0
  • 0
Input
  • 0
  • 0
  • 0
Input
  • 0.683
  • 0.0754
  • 0.00284
Input
  • 0.278
  • 0.000952
  • 0.0000143
Input
  • 0
  • 0
  • 0
Input
  • 1.59
  • 0.0219
  • 0.089
Output
  • 1E+1
  • 0.237
  • 0.357
Output
  • 458
  • 5.01
  • 16.4
Output
  • 0.00487
  • 0.0000525
  • 0.00000462
Output
  • 0
  • 0
  • 0
Output
  • 0.0445
  • 0.00124
  • 0.000246
Output
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
Abiotic depletion potential - fossil resources (ADPF)
  • 2.29E+3
  • 165
  • 31.5
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.00163
  • 0.0000383
  • 7.99E-7
Acidification potential, Accumulated Exceedance (AP)
  • 1.21
  • 0.0367
  • 0.021
Depletion potential of the stratospheric ozone layer (ODP)
  • 0.00000205
  • 2.33E-7
  • 1.08E-8
Eutrophication potential - freshwater (EP-freshwater)
  • 0
  • 0
  • 0
Eutrophication potential - marine (EP-marine)
  • 0
  • 0
  • 0
Eutrophication potential - terrestrial (EP-terrestrial)
  • 0
  • 0
  • 0
Global Warming Potential - biogenic (GWP-biogenic)
  • 11.4
  • 0.00764
  • 0.00652
Global Warming Potential - fossil fuels (GWP-fossil)
  • 564
  • 11.7
  • 2.85
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.114
  • 0.00384
  • 0.000269
Global Warming Potential - total (GWP-total)
  • 576
  • 11.7
  • 2.85
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)
  • 564.6
  • 11.69
  • 2.843
Photochemical Ozone Creation Potential (POCP)
  • 1.11
  • 0.0575
  • 0.00746
Water (user) deprivation potential (WDP)
  • 6E+1
  • 0.796
  • 0.594

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
No records found.
No records found.
No records found.
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
No records found.
No records found.
No records found.
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
No records found.
No records found.
No records found.
Potential Human exposure efficiency relative to U235 (IRP) 1
No records found.
No records found.
No records found.
Potential incidence of disease due to PM emissions (PM) 2
No records found.
No records found.
No records found.
Potential Soil quality index (SQP) 2
No records found.
No records found.
No records found.