Close Go back Collapse all sections
Process Data set: 3-layer wooden floorboards 1-strip and 3-strip (en) en

Key Data Set Information
Reference year 2023
Name
3-layer wooden floorboards 1-strip and 3-strip
Technical purpose of product or process The 3-layer wooden flooarboard is offered in two pattern: • 1-strip: one row of staves along the width of the board (similar appearance to solid floorboard) • 3-strip: three rows of staves across the width of the board (similar appearance to a traditional floor) The 3-layer wooden floorboard can be installed in a floating system, that is glueless and based on modern tongue-and-groove joints. It is a method, that allows to install the floor yourself. The floor is also easy to be dismantled or re-installed. An alternative is to install the floor in a traditional way - by gluing the boards to the subfloor, which ensures stability of the installation even on large surfaces. 3-layer wooden floorboard does not require any additional preservative treatment. The floor is ready for use immediately after installation. More information can be found on the website.
General comment on data set The data selected for LCA originate from ITB-LCI questionnaires completed by manufacturer using the inventory data, ITB and Ecoinvent v. 3.8 databases. No specific data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. Polish electricity was calculated based on Ecoinvent v 3.8. supplemented by actual national KOBiZE data. The allocation rules used for this EPD are based on general ITB-PCR A. 3-layer wooden floorboard production is a line process with multiple co-products in one factory in Poland. Allocation is done on product mass basis. All impacts from raw materials extraction and processing are allocated in A1 module of EPD. 99% of impacts from line production were inventoried and allocated to all 3-layer wooden floorboard production. Municipal waste and waste water of whole factory were allocated to module A3. Energy supply was inventoried for whole production process. Emissions in the manufacturing plant are measured and were allocated to module A3. Packaging materials were not taken into consideration They are recycled in a closed loop. The life cycle analysis (LCA) of the declared products covers product stage – modules A1-A3, end of life – modules C1-C4 and benefits and loads beyond the system boundary – module D (cradle-to-gate with options) in accordance with EN 15804 + A2 and ITB PCR A. The details of systems limits are provided in product technical report. All materials and energy consumption inventoried in factory were included in calculation. Office impacts were also taken into consideration. In the assessment, all significant parameters from gathered production data are considered, i.e. all material used per formulation, utilised thermal energy, internal fuel and electric power consumption, direct production waste, and all available emission measurements. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804 + A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): ND kg
  • Carbon content (biogenic) - packaging: ND kg
Time representativeness
Data set valid until 2028
Technological representativeness

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Input
  • 123
  • 0.549
  • 28.4
  • 0.027
  • 0.000283
  • -101
  • -1.12
  • -101
Input
  • 92.8
  • 0
  • 0
  • 0
  • 0
  • 101
  • 1.12
  • 101
Input
  • 216
  • 0.549
  • 28.4
  • 0.027
  • 0.000283
  • 0.0216
  • 0.0004
  • -0.227
Input
  • 12.5
  • 29.8
  • 66.1
  • 0.395
  • 0.0197
  • 0.956
  • 0.0207
  • -93.3
Input
  • 6.58
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 19.1
  • 29.8
  • 70.4
  • 0.395
  • 0.0197
  • 0.956
  • 0.0207
  • -93.3
Input
  • 0.0152
  • 0.0132
  • 0.015
  • 0.0000301
  • 0.00000662
  • 0.00231
  • 0.00000787
  • -0.00242
Input
  • 0.263
  • 0.000154
  • 0.000455
  • 1.65E-7
  • 7.29E-8
  • 0.00000539
  • 2.7E-7
  • -9.79E-7
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0.0398
  • 0.00439
  • 0.017
  • 0.000121
  • 0.00000248
  • -0.00162
  • 0.0000207
  • -0.00525
Output
  • 0.149
  • 0.0412
  • 0.0312
  • 7.71E-8
  • 0.0000221
  • 0.0129
  • 0.0000185
  • -0.00541
Output
  • 3.75
  • 0.749
  • 1.67
  • 0.0022
  • 0.000393
  • 0.0698
  • 0.000562
  • -0.211
Output
  • 0.0809
  • 0.000202
  • 0.0000899
  • 3.2E-7
  • 1.36E-7
  • 2.78E-7
  • 6.87E-9
  • -0.00000105
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.000363
  • 0.000108
  • 0.00487
  • 0.00000226
  • 6.11E-8
  • 0.00001
  • 1.59E-7
  • -0.0000116
Output
  • 0.0132
  • 8.47E-7
  • 0.00299
  • 3.17E-9
  • 4.94E-10
  • 1.4E-7
  • 6.97E-10
  • -1.84E-7
Output
  • 0.147
  • 0.0378
  • 0.175
  • 0.00108
  • 0.0000219
  • 0.000319
  • 0.00000365
  • -0.031
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Eutrophication potential - freshwater (EP-freshwater)
  • 0.000889
  • 0.000171
  • 0.0066
  • 0.0000415
  • 8.94E-8
  • 0.0000489
  • 1.89E-7
  • -0.0000198
Acidification potential, Accumulated Exceedance (AP)
  • 0.0147
  • 0.00803
  • 0.0413
  • 0.000242
  • 0.0000054
  • 0.00116
  • 0.00000683
  • -0.0041
Eutrophication potential - terrestrial (EP-terrestrial)
  • 0.0349
  • 0.0251
  • 0.0522
  • 0.000295
  • 0.0000178
  • 0.00596
  • 0.0000271
  • -0.0102
Abiotic depletion potential - fossil resources (ADPF)
  • 46.9
  • 29.8
  • 67
  • 0.373
  • 0.0197
  • 0.956
  • 0.0207
  • -93
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.0000289
  • 0.0000104
  • 0.0000426
  • 3.3E-8
  • 4.71E-9
  • 2.21E-7
  • 2.06E-9
  • -0.00000164
Global Warming Potential - biogenic (GWP-biogenic)
  • -11.1
  • 0.00885
  • 0.0692
  • 0.000412
  • 0.00000455
  • 10.5
  • 0.00754
  • 10.5
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.197
  • 0.00103
  • 0.00182
  • 0.00000537
  • 5.22E-7
  • 0.0000295
  • 7.3E-7
  • -0.000187
Global Warming Potential - total (GWP-total)
  • -8.47
  • 2.04
  • 4.1
  • 0.0233
  • 0.00133
  • 10.6
  • 0.00854
  • 5.14
Global Warming Potential - fossil fuels (GWP-fossil)
  • 2.63
  • 2.03
  • 4.03
  • 0.0228
  • 0.00133
  • 0.114
  • 0.000993
  • -5.39
Photochemical Ozone Creation Potential (POCP)
  • 0.0132
  • 0.00776
  • 0.0166
  • 0.0000828
  • 0.00000544
  • 0.00151
  • 0.000011
  • -0.00408
Eutrophication potential - marine (EP-marine)
  • 0.00334
  • 0.00231
  • 0.00639
  • 0.0000344
  • 0.00000163
  • 0.000621
  • 0.0000302
  • -0.000891
Water (user) deprivation potential (WDP)
  • 1.76
  • 0.164
  • 2.05
  • 0.00757
  • 0.0000913
  • 0.481
  • 0.000118
  • 0.34
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
No records found.
Depletion potential of the stratospheric ozone layer (ODP)
  • 3.02E-7
  • 4.53E-7
  • 1.77E-7
  • 4.38E-10
  • 3.08E-10
  • 1.91E-9
  • 2.2E-11
  • -8.59E-7

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential incidence of disease due to PM emissions (PM) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Potential Soil quality index (SQP) 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0