Close Go back Collapse all sections
Process Data set: HelCor pipes galvanized or PE-coated (en) en

A more recent version of this data set exists in the database.

Most recent version of this data set:00.03.002

Key Data Set Information
Reference year 2022
Name
HelCor pipes galvanized or PE-coated
Technical purpose of product or process The HelCor pipes are helical corrugated pipes, produced from steel coils with thickness ranging from 1.5 mm to 3.5 mm in two types of corrugations D1 - 68 x 13 mm and D3 - 125 x 26 mm. Steel used for the production of HelCor pipes, as well as coupling bands, conform to EN 10346 and is delivered in coils, with a protection coating in accordance to a/m standards: • 600 g/m zinc coating total both sides, equivalent to 42 µm on each side, • 1000 g/m zinc coating total both sides, equivalent to 70 µm on each side, • 600 g/m zinc coating both sides, equivalent to 42 µm on each side, with an additional 300 µm polymer film (TrenchcoatTM or W-ProtectTM) on one or both sides. The HelCor pipes are designed for all road and railway live load classes as well as under the load of special vehicles. The pipes could be design just as continuously hot-dip galvanized and as an option with an additional 300 µm polymer film (TrenchcoatTM or W-ProtectTM) on one or both sides, in an environment with increased corrosive aggressiveness. The mechanical properties and specification of the HelCor pipes are presented in Tables 1 and 2. Application areas: • roads and railway culverts, • underground passages, • hydrotechnical structures, • relining of deteriorated structures, • ecological passages. More information is available on the website of ViaCon AB https://viacon.se/en/.
General comment on data set The data selected for LCA analysis originate from ITB-LCI questionnaires completed by ViaCon AB using the inventory data, ITB and Ecoinvent databases. No specific data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. The data for the processes comes from the following databases: Ecoinvent v.3.8 and ITB-Database. Specific data quality analysis was a part of external audit. The allocation rules used for this EPD are based on general ITB PCR A. Production of the HelCor pipes is a line process conducted in the factory of ViaCon AB, located in Lycksele (Sweden). Allocation was done on product mass basis. All impacts from raw materials extraction and processing are allocated in module A1 of the LCA. Impacts from the global line production ViaCon AB were inventoried and 100% were allocated to the HelCor pipes production. Water and energy consumption (electrical grid, diesel), associated emissions and generated wastes are allocated to module A3. Packaging materials were takien into consideration. The life cycle analysis (LCA) of the declared products covers: product stage – modules A1-A3, end of life – modules C1-C4 and benefits and loads beyond the system boundary – module D (cradle-to-gate with options) in accordance with EN 15804+A2 and ITB PCR A. Energy and water consumption, emissions as well as information on generated wastes were inventoried and were included in the calculations. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804+A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2027
Time representativeness description "29.03.2022" - "29.03.2027"
Technological representativeness

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Disposal
C4
 Recycling Potential
D
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 1.48E+3
  • 5.01
  • 505
  • 0.0891
  • 0.221
  • 0.0251
  • -534
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 2.18E+4
  • 179
  • 1.67E+3
  • 15.6
  • 15.4
  • 2.89
  • -9.31E+3
Input
  • 125
  • 0.0991
  • 0.0736
  • 0.0061
  • 0.00517
  • 0.000607
  • 0
Input
  • 0.0362
  • 0.000931
  • 0.000232
  • 0.0000199
  • 0.000057
  • 0.0000159
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 10.9
  • 0.0344
  • 1.06
  • 0.000946
  • 0.00194
  • 0.00316
  • 0
Output
  • 15.3
  • 0.326
  • 0.675
  • 0.0209
  • 0.0173
  • 0.00307
  • -0.0141
Output
  • 837
  • 6.52
  • 4.76
  • 0.147
  • 0.307
  • 0.0432
  • -512
Output
  • 0.0582
  • 0.0000283
  • 0.0197
  • 0.000109
  • 0.00000115
  • 0.0000192
  • -0.0308
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.184
  • 0.000673
  • 87.7
  • 0.0000208
  • 0.0000477
  • 0.00000578
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Disposal
C4
 Recycling Potential
D
  • 2.12E+4
  • 179
  • 1.64E+3
  • 15.6
  • 15.4
  • 2.89
  • -8.66E+3
  • 0.0535
  • 0.0000649
  • 0.0000449
  • 5.87E-7
  • 0.00000368
  • 2.42E-7
  • 0.0105
Acidification potential (AP)
  • 22.1
  • 0.0536
  • 0.0649
  • 0.00696
  • 0.00422
  • 0.00099
  • -2.02
  • 0.885
  • 0.00147
  • 0.00155
  • 0.0000365
  • 0.0000698
  • 0.00000981
  • -0.354
  • 1.67E+3
  • 12.3
  • 9.25
  • 1.17
  • 1.04
  • 0.106
  • -556
Ozone Depletion Potential (ODP)
  • 0.0000984
  • 0.00000259
  • 0.00000543
  • 2.48E-7
  • 2.4E-7
  • 4.26E-8
  • -0.0000417
Photochemical Ozone Creation Potential (POCP)
  • 7.14
  • 0.0524
  • 0.0422
  • 0.00857
  • 0.00425
  • 0.0011
  • -1.92