| Key Data Set Information | |
| Location | PL |
| Geographical representativeness description | - |
| Reference year | 2026 |
| Name |
|
| Use advice for data set | The life cycle analysis of the declared products covers “Product Stage” A1-A3, A4-A5, C1-C4+D modules in accordance with EN 15804 and ITB PCR A (cradle to gate with options). Energy and water consumption, emissions as well as information on generated wastes were inventoried and were included in the calculation. It can be assumed that the total sum of omitted processes does not exceed 2% of all impact categories. In accordance with EN 15804+A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA. |
| Technical purpose of product or process | ETICS fasteners are mechanical fixing elements used for installing thermal insulation boards (EPS, XPS, mineral wool) in External Thermal Insulation Composite Systems on concrete or masonry substrates. The product group includes different types of fasteners with plastic sleeves and pins made of galvanized steel, stainless steel, or plastic. The screws may be either driven or screwed into the substrate, and some variants include an additional plastic coating. Some variants also include additional insulating components such as EPS or MW discs. Products differ in length, diameter, installation method (recessed or surface-mounted), and the length of the expansion zone depending on the substrate and system requirements. ETICS fasteners transfer wind suction loads acting on façades. The products are CE-marked according to Regulation (EU) No. 305/2011 (CPR) based on ETA. The declared service life of the products is 25 years for ETA-certified products. Associated Approvals / Certificate Numbers: - ETA-11/0232 - ETA-13/0724 - ETA-22/0611 - ETA-16/0509 - ETA-17/0450 - ETA-15/0373 - ETA-13/0107 - ITB-KOT-2019/0913 - ITB-KOT-2021/1815 All additional technical information about the product is available on the manufacturer's website and catalogues. - |
| General comment on data set | The data selected for LCA originate from ITB-LCI questionnaires completed by producer. No specific data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. The background data for the processes come from the following resources: database Ecoinvent v.3.11 and KOBIZE (Polish electricity mix and combustion factors for fuels). KOBIZE data is supplemented with Ecoinvent data on the national electricity mix impact where no specific indicator data is provided. Specific (LCI) data quality analysis was a part of the input data verification. The time related quality of the data used is valid (5 years). The allocation rules used for this EPD are based on general ITB ’s document PCR A. Production of the ETICS is a line process (as presented in Figure 2) conducted in the two manufacturing plant located in Kuznica Kiedrzynska or Wanaty near Czestochowa. Input and output data from the production is inventoried and allocated to the production on the mass basis. The declaration covers all ETICS products manufactured in the plant. Their production resources and processing stages are basicly similar, so it is possible to average the production by product weight. Minimum 99.0% input materials and 100% energy consumption (electricity, gas, LPG, other) were inventoried in a processing plant and were included in the calculation. In the assessment, all available data from production have been considered, i.e. all raw materials/elements used as per formulation process, utilized thermal energy for heating , and electric power consumption. Thus, material and energy flows contributing less than 1 % of mass or energy have been considered. It can be assumed that the total sum of neglected processes does not exceed 1 % of energy usage and mass per modules A or D. Machines and facilities required during production are neglected. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2031 |
| Time representativeness description | "2026-02-27" - "2031-02-27" |
| Technological representativeness | |
| Technology description including background system | - |
| Type of data set | EPD | ||||
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2026-05-28T14:09:10 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 4958fcaf-f179-4af2-84a8-ade2300b92ae |
| Date of last revision | 2026-05-28T11:30:35.6563859Z |
| Data set version | 00.03.000 |
| Registration authority |
ITB-EPD Poland
|
| Registration number | 917/2026 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
| |
Indicators of life cycle