Close Go back Collapse all sections
Process Data set: Clinker brick slips (en) en

Key Data Set Information
Reference year 2022
Name
Clinker brick slips
Technical purpose of product or process KING KLINKER brick slips produced by Klinkier Przysucha S.A characterize durability and the long service life exceeding 100 years without changes of physicochemical properties of the products. Brick slips are intended for finishing external wall surfaces of building objects, protecting against unfavorable weather conditions and damage, ensuring the proper heat flow between the interior and exterior environments, simultaneously providing desirable aesthetic values. Brick slips KING KLINKER produced by Klinkier Przysucha S.A. are ceramic products made of white, yellow or red clay, clinker scrap, sand and additives. Brick slips are available in different colors, sizes and have various structures. More details can be found on the website www.kingklinker.com
General comment on data set The specific data used for LCA were provided by Klinkier Przysucha S.A. (KING KLINKER) and acquired from ITB databases. The generic data were adopted from Ecoinvent databases v.3.8. No specific data selected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. The data for the processes comes from the following databases: Ecoinvent v.3.8 (raw materials, additives, ancillary materials), specific EPDs (packaging materials). The allocation rules used for this LCA are based on general ITB PCR A and product mass basis. Production of the brick slips based on white, yellow and red clay is a line process performed in Klinkier Przysucha S.A. (KING KLINKER) manufacturing plant located in Skrzynsko (Poland). All impacts from raw materials extraction and processing are allocated in module A1 of the LCA. Total impacts from the line production of Klinkier Przysucha S.A. (KING KLINKER) were inventoried and allocated to the clinker brick slips production. Water and energy consumption, associated emissions and generated wastes are allocated to module A3. Utilization of packaging material was taken into consideration. Module A2 includes transport of raw materials from their suppliers to Klinkier Przysucha S.A. (KING KLINKER) in Skrzynsko. The life cycle analysis (LCA) of the declared products covers: product stage – modules A1-A3, end of life – modules C1, C4 and benefits and loads beyond the system boundary – module D (cradleto- gate with options) in accordance with EN 15804+A1 and ITB PCR A. The details of systems limits are provided in the background report. Energy and water consumption, emissions as well as information on generated wastes were inventoried and were included in the calculations. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804+A1, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2022
Time representativeness description "25.02.2022" - "25.02.2022"
Technological representativeness

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Disposal
C4
 Recycling Potential
D
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 19.3
  • 0.107
  • 8.33
  • 0.0000635
  • 0.00405
  • -0.143
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 5E+1
  • 1.61
  • 182
  • 0.0119
  • 0.522
  • -0.387
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0.0803
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0.0188
  • 7.11E-7
  • 0.00856
  • 1.98E-7
  • 0.00135
  • -0.000241
Output
  • 0.00024
  • 0.0000127
  • 0.00242
  • 3.08E-8
  • 0.0000013
  • -0.00000139
Output
  • 0.317
  • 0.492
  • 0.119
  • 0.000015
  • 13.8
  • -0.00415
Output
  • 0.000082
  • 0.0000356
  • 0
  • 7.77E-8
  • 0.00000328
  • -0.00000385
Output
  • 0
  • 0
  • 12.4
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 13.8
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Disposal
C4
 Recycling Potential
D
  • 38.4
  • 1.53
  • 173
  • 0.011
  • 0.479
  • -0.358
  • 0.0000208
  • 0
  • 0.0000561
  • 4.22E-10
  • 1.9E-8
  • -4.56E-7
Acidification potential (AP)
  • 0.0133
  • 0.00147
  • 0.0214
  • 0.00000395
  • 0.000266
  • -0.000195
  • 0.00468
  • 0.00026
  • 0.00316
  • 9.2E-7
  • 0.0000617
  • -0.0000385
  • 2.73
  • 0.199
  • 15.1
  • 0.000818
  • 0.0368
  • -0.0287
Ozone Depletion Potential (ODP)
  • 9.09E-8
  • 0
  • 2.73E-9
  • 1.39E-10
  • 5.85E-9
  • -3.97E-9
Photochemical Ozone Creation Potential (POCP)
  • 0.00107
  • 0.000105
  • 0.0000785
  • 2.14E-7
  • 0.0000107
  • -0.0000069