Key Data Set Information | |
Reference year | 2024 |
Name |
|
Use advice for data set | The life cycle analysis of the declared products covers “Product Stage” A1-A3, A4-A5, C1-C4+D modules in accordance with EN 15804 and ITB PCR A (cradle to gate with options). Energy and water consumption, emissions as well as information on generated wastes were inventoried in manufacturing plant (LCI) and were included in the calculation. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804+A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA. |
Technical purpose of product or process | The purpose of dock shelter (covered by this EPD) is to contain air movement during the loading process in order to prevent heat loss and limit any negative influence of such external factors as precipitation, dust and other particulates. Dock seal dimensions depend on: width and height of trucks, door dimensions and sealing efficiency required. The weighted average statistical product is made of the following materials: metals (50.5%, aluminum 9.3%, PVC 39.2%). All additional technical information about the product is available on the manufacturer's website and catalogues. |
General comment on data set | The data selected for LCA originate from ITB-LCI questionnaire completed by GLOBAL SYSTEM Sp. z o.o. and verified during LCI data audit. No data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency is judged as good. The background data for the processes come from the following resources database Ecoinvent v.3.9.1 (steel, sheet metal, PVC, aluminium, welding products, paints, graphite, fibre matts, EUR-flat pallet). Specific (LCI) data quality analysis was a part of the input data verification. Where no background data is available, data gaps were complemented by manufacturer information and literature research. The allocation rules used for this EPD are based on general ITB’s document PCR v1.6., 2023. Production of the dock shelter products is a line process (as presented in Figure 2) conducted in the manufacturing plant located in Podegrodzie (Poland). Input and output data from the production is inventoried and allocated to the production on the mass basis. The declaration covers a wide range of fire curtains. Their production resources and processing stages are basicly similar, so it was possible to average the production by product mass and reference size. The reference is calculated as the representative selection of the product group. Minimum 99.5% input materials and 100% energy consumption (electricity, gas, other) were inventoried in a processing plant and were included in the calculation. In the assessment, all significant parameters from gathered production data are considered, i.e. all material used per formulation, utilized thermal energy, and electric power consumption, direct production waste and available emission measurements. Tires consumption for transport was not considered. Substances with a percentage share of less than 0.1% of total mass were excluded from the calculations. The packaging products (wooden pallets) are included. |
Copyright | Yes |
Owner of data set | |
Quantitative reference | |
Reference flow(s) |
|
Biogenic carbon content |
|
Time representativeness | |
Data set valid until | 2029 |
Technological representativeness |
Type of data set | EPD | ||||
Subtype | average dataset | ||||
LCA methodology report | |||||
Data sources, treatment and representativeness | |||||
Documentation of data quality management | |||||
Data source(s) used for this data set | |||||
Completeness | |||||
Validation | |||||
| |||||
Compliance Declarations |
Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Data generator | |
Data set generator / modeller |
|
Data entry by | |
Time stamp (last saved) | 2024-06-27T11:51:20 |
Data set format(s) | |
Publication and ownership | |
UUID | 5ee94eab-6fc1-48c2-ae0b-fd3a37fe037c |
Date of last revision | 2024-06-27T09:40:39.3227096Z |
Data set version | 00.03.000 |
Registration authority |
ITB-EPD Poland
|
Registration number | 624/2024 |
Owner of data set | |
Copyright | Yes |
License type | Free of charge for all users and uses |
Access and use restrictions | None |
|
Indicators of life cycle