| Key Data Set Information | |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | The life cycle analysis of the declared products includes the production stage (modules A1 - A3) and modules A4, C1-C4+D ("from cradle to grave with options”) according to EN 15804 and ITB PCR A. |
| Technical purpose of product or process | This declaration covers sanitary and kitchen products, which are made in three material options: - gelcoat products - bathtubes, shower trays, washbasins, - solid-surface products - shower trays, washbasins, - granite (quartz) products - washbasins, sinks. Washbasins The product range includes oval, square and rectangular wash basins of various sizes and depths, with the possibility of manufacturing a product in any shape at the customer's request. Available product types include countertop, overhead and double wash basins. The surfaces of the wash basins are resistant to washing, scrubbing, damage and scratching. Shower trays The product range includes square and semicircular shower trays. They are manufactured using the same technology as the wash basins, which guarantees many years of use without losing their elegant appearance and durability. The surfaces of the shower trays are highly resistant to mechanical damage and chemicals, while retaining their anti-slip properties. They can be manufactured in any colour, texture and size on request. Bathtubes The product range includes free-standing bathtubes, which are offered in two types: - made of Solid Surface material, where the basic variant is white, - covered with gelcoat, where the customer can choose from a range of colours. Other types of bathtubs are also available on special request. Thanks to the use of synthetic marble (gelcoat), the product is solid and durable, as well as resistant to mechanical damage. Sinks The manufacturer offers quartz sinks: single-chamber, one-and-a-half-chamber, double-double, corner, suspended or overlay sinks. The sinks are made from a combination of resin and pigments. The high proportion of quartz gives the products smoothness and a natural, stone-like appearance. The epoxy resin ensures high durability. The products are impact-, scratch- and heat-resistant. |
| General comment on data set | The data for the calculation of modules A1-A4 came from verified LCI inventory data from the plant. In accordance with Annex E of EN 15804 + A2, a data quality assessment was carried out. For technical representativeness, processes with a quality level of "very good" represent 99% of the values for the climate change indicators. For geographical and temporal representativeness, a process evaluation level of "very good" was obtained. The allocation in this study was made in accordance with ITB PCR A guidelines. The production and storage of the products covered in this declaration takes place at the DREMEX production site at 15 Pod Borem Street in Glogów Malopolski. Input data and emissions were collected for the production facility. All inputs from raw material extraction are allocated in module A1. Production of products is based on raw and recycled materials. 100% of the receipts from the production lines have been inventoried and allocated to the production of products. Module A2 contains the transport of raw materials from Polish distributors to the factory in Glogów Malopolski. The utilities for the entire production process were inventoried and included in module A3. 100% of input materials and 100% of media consumption were inventoried at the Glogów Malopolski production plant. All relevant parameters from the collected production data are included in the assessment, i.e. all materials used in production,electricity, water and hard coal consumption and emissions. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Technological representativeness | |
| Type of data set | EPD | ||||
| Subtype | average dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-04-11T13:02:58 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 618ca942-ae15-4be9-adcd-b0f2675d59d3 |
| Date of last revision | 2024-04-11T11:01:09.0675344Z |
| Data set version | 00.03.000 |
| Registration authority |
ITB-EPD Poland
|
| Registration number | 626/2024 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
| |
Indicators of life cycle