Close Go back Collapse all sections
Process Data set: Continuous rooflights mcr PROLIGHT with vents (en) en

Key Data Set Information
Reference year 2021
Name
Continuous rooflights mcr PROLIGHT with vents
Technical purpose of product or process mcr PROLIGHT continuous rooflights with ventilation and smoke exhaust double-leaf ven mcr PROLIGHT continuous rooflights are installed on the roofs of buildings and provides daylight into the facility. Additionally, the rooflights can be used to install vents for various functions: smoke extraction, both - smoke extraction and ventilation or ventilation only. Devices are produced according to the customer's requirements, in accordance with the design of the building object. After analyzing production orders, the most frequently manufactured mcr PROLIGHT continuous rooflights is the product with following specification, which has been treated as representative: - continuous rooflight dimensions 3 m x 22 m, base 77 cm, for insulation 80 cm, self-supporting, painted RAL9010 with safety net, - glazing: PC 10 mm + polyester board (Broof) + PC 10 mm, - in continuous rooflight 3 ventilation and smoke exhaust vents with dimensions 1,2 m x 2,2 m, - pneumatic control SL750, WL750, - mass: 2335 kg.
General comment on data set The data for the LCA calculations came from the inventoried statements of the production plant of the company MERCOR S.A. in Cieplewo near Pruszcz Gdanski in the Pomeranian Voivodeship. Data for the calculations came from Ecoinvent v. 3.6 and from databases available in Bionova's OneClickLCA software. The characterising factors are CML ver. 4.2 based on EN 15804:2013. Allocation in this study was made in accordance with the ITB PCR A guidelines. The production of mcr PROLIGHT spot products, mcr ULTRA THERM spot products and mcr PROLIGHT continuous rooflights takes place in the manufacturing plant of MERCOR S.A. in Cieplewo near Pruszcz Gdanski. The input data and emissions were collected in three separate production lines, respectively for each product group. Allocation to a single, representative product was made on the basis of product weight. All impacts from raw material extraction are allocated in module A1. 100% of the production line receipts were inventoried and allocated to product production. Module A2 contains transport of aluminium profiles, steel profiles, PVC, aluminium sheet from Polish suppliers to the factory in Cieplewo. Energy, fuel and waste deliveries for the whole production process were inventoried and included in module A3. The life cycle analysis of the declared products includes the Production Stage (modules A1 - A3) and modules A4, A5 ("from cradle to grave with options”) according to EN 15804+A1 and ITB PCR A. All relevant parameters from the collected production data such as materials used in production, electricity, fuels used, waste, available emission measurements are taken into account in the life cycle assessment. It can be assumed that the sum of omitted processes does not exceed 5% of all impact categories.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2021
Time representativeness description "20.09.2021" - "20.09.2021"
Technological representativeness

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
 Installation
A5
Input
  • 2.91E+4
  • 71.8
  • 58.7
  • 2.17
  • 0.0234
Input
  • 253
  • 0
  • 0
  • 0
  • 0
Input
  • 2.94E+4
  • 71.8
  • 58.7
  • 2.17
  • 0.0234
Input
  • 1.58E+5
  • 2.96E+4
  • 943
  • 894
  • 3.74
Input
  • 7.24E+3
  • 0
  • 0
  • 0
  • 0
Input
  • 1.65E+5
  • 2.96E+4
  • 943
  • 939
  • 3.74
Input
  • 227
  • 1.62
  • 0
  • 0.49
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 2.5E+3
  • 0
  • 0
  • 0
  • 0
Input
  • 917
  • 1.93
  • 0.0439
  • 0.0581
  • 0.000372
Output
  • 27.3
  • 7.48
  • 0.00951
  • 0.226
  • 0.00467
Output
  • 1.72E+3
  • 122
  • 3.03
  • 3.67
  • 0.0563
Output
  • 6.22
  • 0.215
  • 0.000914
  • 0.00648
  • 0.000025
Output
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 2.32
  • 0
  • 0
  • 0
  • 0
Output
  • 6.71E-10
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
 Installation
A5
  • 1.49E+5
  • 2.96E+4
  • 851
  • 894
  • 3.74
  • 2.25
  • 0.0016
  • 0.00000924
  • 0.000482
  • 4.95E-7
Acidification potential (AP)
  • 45.4
  • 3.03
  • 0.621
  • 0.0914
  • 0.000667
  • 5.11
  • 0.373
  • 0.0817
  • 0.0113
  • 0.000127
  • 1.2E+4
  • 2.8E+2
  • 92.1
  • 8.45
  • 0.283
Ozone Depletion Potential (ODP)
  • 0.00024
  • 0.00038
  • 0.00000143
  • 0.0000115
  • 4.5E-8
Photochemical Ozone Creation Potential (POCP)
  • 3.99
  • 0.123
  • 0.029
  • 0.00371
  • 0.0000731