Close Go back Collapse all sections
Process Data set: eUP DESKS, WORKBENCHES (en) en

Key Data Set Information
Reference year 2022
Name
eUP DESKS, WORKBENCHES
Technical purpose of product or process eUP DESKS TABLE TOP TYPES: fixed TABLE TOP SHAPES: rectangular TABLE TOP FINISH TYPES: Melamine - melamine faced chipboard, thickness 25mm BASE TYPES: T-Legs - square columns made of steel Height adjustment types: electric Finish options: Powder coating eUP WORKBENCHES TABLE TOP TYPES: fixed TABLE TOP SHAPES: rectangular TABLE TOP FINISH TYPES: Melamine - melamine faced chipboard, thickness 25mm or 19mm BASE TYPES: H-Legs - square columns made of steel Height adjustment types: electric Finish options: Powder coating CERTIFICATES: GS Mark for selected configurations APPLICATION: Office Workstations
General comment on data set The data selected for LCA analysis originate from ITB-LCI questionnaires completed by Nowy Styl sp. z o.o. using the inventory data, ITB and Ecoinvent databases. No specific data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. The allocation rules used for this EPD are based on general ITB-PCR A v. 1.5. Production of the desks and workbenches eUP is a line process carried out in four factories of Nowy Styl sp. z o.o. located in Krosno and Rzepedz (Poland). Allocation was done on product mass basis. All impacts from raw materials extraction are allocated in A1 module of the LCA. 100% of impacts from the line production of Nowy Styl sp. z o.o. were inventoried and 0,24% eUP were allocated to 0,24% eUP production. Utilization of packaging material was taken into consideration. Module A2 includes transport of raw materials such as wood-faced boards, wood, polymer components, steel elements, papers, additives, ancillary materials and packaging materials from their suppliers to Nowy Styl sp. z o.o. in Jaslo and in Rzepedz. Municipal wastes of factory were allocated to module A3. Energy supply was inventoried for whole factory and was allocated to the of the desks and workbenches eUP production. Emissions in the factory are measured and were allocated to module A3. The green energy purchased by Nowy Styl sp. z o.o. in 2020 was not included in the LCA calculation. The life cycle analysis of the declared products covers “Product Stage”, A1-A3, C1, C2, C3, C4 and D modules (Cradle-to-Gate with options) accordance with ISO 14040 and PCR A v.1.5. The details of systems limits are provided in product technical report. Energy and water consumption, emissions as well as information on generated wastes were inventoried and were included in the calculations. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with ITB PCR A v. 1.5., machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2027
Technological representativeness

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 8.9E+2
  • 0.0387
  • 5.65
  • 0.0541
  • 0.000315
  • 0.171
  • 0.00252
  • -161
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 595
  • 1.84
  • 86.6
  • 0.789
  • 0.0219
  • 31.6
  • 0.153
  • -302
Input
  • 14.3
  • 0.000942
  • 0
  • 0
  • 0.00000736
  • 0.000136
  • 0.0000328
  • 22.2
Input
  • 29.1
  • 0.0000112
  • 0
  • 0
  • 8.11E-8
  • 0.00000219
  • 0.00104
  • 44.8
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0.237
  • 0.000298
  • 0.0323
  • 0.000242
  • 0.00000276
  • 0.000914
  • 0.00018
  • -0.0668
Output
  • 0.817
  • 0.00285
  • 0.00459
  • 1.54E-7
  • 0.0000246
  • 0.0156
  • 0.000145
  • -0.0902
Output
  • 23.7
  • 0.0525
  • 0.549
  • 0.0044
  • 0.000437
  • 0.489
  • 0.0328
  • -4.22
Output
  • 0.0047
  • 0.0000124
  • 0.0000677
  • 6.38E-7
  • 1.64E-9
  • 0.000205
  • 0.00000103
  • -0.000162
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.00283
  • 0.00000729
  • 4.08
  • 0
  • 6.79E-8
  • 0.00346
  • 2.72E-7
  • 0.521
Output
  • 0.00000883
  • 5.64E-8
  • 0
  • 0
  • 5.49E-10
  • 7.08E-9
  • 3.45E-9
  • -6.75E-7
Output
  • 1.77
  • 0.00254
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 1.32
  • 0.000194
  • 0.483

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
  • 22.6
  • 0.0112
  • 1.58
  • 0.745
  • 0.0219
  • 29.2
  • 0.153
  • -282
  • 0.000625
  • 7.68E-7
  • 0.00000707
  • 6.59E-8
  • 5.24E-9
  • 0.00000118
  • 1.13E-8
  • 0.000242
Acidification potential (AP)
  • 0.178
  • 0.000493
  • 0.0508
  • 0.000484
  • 0.000006
  • 0.011
  • 0.0000495
  • -0.0211
  • 0.0158
  • 0.000012
  • 0.00866
  • 0.0000829
  • 9.94E-8
  • 0.0000792
  • 4.13E-7
  • -0.0153
  • -13.3
  • 0.127
  • 5.46
  • 0.0497
  • 0.00148
  • 2.76
  • 0.00946
  • -15.6
Ozone Depletion Potential (ODP)
  • 0.00000183
  • 2.76E-8
  • 1.19E-7
  • 8.75E-10
  • 3.42E-10
  • 4.63E-7
  • 2.32E-9
  • -6.58E-7
Photochemical Ozone Creation Potential (POCP)
  • 0.145
  • 0.000464
  • 0.0176
  • 0.000166
  • 0.00000605
  • 0.0132
  • 0.0000579
  • -0.0155