Close Go back Collapse all sections
Process Data set: FIBRIS softboard and hardboard produced in Przemysl (en) en

A more recent version of this data set exists in the database.

Most recent version of this data set:00.03.002

Key Data Set Information
Reference year 2021
Name
FIBRIS softboard and hardboard produced in Przemysl
Technical purpose of product or process FIBRIS boards are made using the wet method, produced on five production lines. Company specializes in the production of porous panels (eg Fibro Natur Standard, Thermo, WR, Wall, Izopanel, Eco-Bit). These boards have many uses, but they are most commonly used in all construction industries. FIBRIS also manufactures hardboards (including varnished, perforated, oiled) that are used in the furniture, packaging and steel industries. Another product is decorative colored wood chips, which can be found in gardens, alleys or flowerbed. Below you may find softboard and hardboard types with specific description, which are grouped in this Environmental declaration.
General comment on data set The values determined to calculate the LCA originate from verified FIBRIS inventory data. The data for the processes come from the following databases: Ecoinvent, ITB Data , specific EPDs. Specific data quality analysis was a part of external ISO 14001 audit. Characterization factors are CML based on EN 15804+A1 version (PN EN 15804+A1:201404) The allocation rules used for this EPD are based on general ITB PCR A . The FIBRIS softboard and hardb oard products production is a line process with multipl e co products Allocation was done on product mass basis All impacts from raw materials extraction are allocated in A1 module of EPD. 99.9% of impacts from line production were inventoried and allocated to FIBRIS softboard and hardboard production. Municipal waste and waste water of the whole factory were allocated to module A3. Electricity was inventoried for whole production process. Emissions are measured separately as well and presented in A3 module. The life cycle analysis of the examined products covers “Product Stage and End of Life Stage”, A1-A3, C1-C4 and D modules (Cradle to Gate with options) in accordance with EN 15804+A1 and ITB-PCR A. Details on systems limits are provided in product specific report. All materials and energy consumption inventoried in factory were included in calculation. Office impacts were also taken into consideration. In the assessment, all significant parameters from gathered production data are considered, i.e. all material used per formulation, utilized thermal energy, internal fuel and electric power consumption, direct production waste, and all available emission measurements. This study also takes into account some material flows of less than 1% and energy flows with a proportion of less than 1 %. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804, machines and facilities (capital goods) required for and during production are excluded, ass transportation of employees.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2026
Time representativeness description "13.12.2021" - "13.12.2026"
Technological representativeness

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 4.76E+4
  • 0.236
  • 795
  • 0
  • 0.00000243
  • 1.78E+3
  • 0
  • 3.08E+3
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 2.31E+3
  • 182
  • 1.25E+4
  • 0
  • 0.000423
  • 775
  • 0
  • 4.7E+3
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 9.11
  • 0
  • 0
  • 0.0000212
  • 0
  • 0
  • 0.911
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 27.9
  • 0.0000807
  • 0.0444
  • 0
  • 1.87E-10
  • 55.9
  • 0
  • -47.6
Output
  • 0.00111
  • 0.000619
  • 0.0448
  • 0
  • 0.00000814
  • 0.000802
  • 0
  • 0.00663
Output
  • 18
  • 0.124
  • 0.391
  • 0
  • 0.00152
  • 9.24
  • 0
  • -4.66
Output
  • 0.00825
  • 0
  • 0
  • 0
  • 0
  • 0.00184
  • 0
  • 0.00163
Output
  • 0
  • 0
  • 85.8
  • 0
  • 0
  • 0
  • 0
  • 8.58
Output
  • 0
  • 0
  • 3.45
  • 0
  • 0
  • 0
  • 0
  • 0.345
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 3.13E+3
  • 0
  • -3.13E+3
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
  • 2.01E+3
  • 174
  • 1.19E+4
  • 0
  • 0.000403
  • 657
  • 0
  • 4.49E+3
  • 0.512
  • 0
  • 0.00394
  • 0
  • 0
  • 0.000304
  • 0
  • 0.0513
Acidification potential (AP)
  • 0.682
  • 0.121
  • 3.8
  • 0
  • 4.1E-7
  • 0.782
  • 0
  • 1.74
  • 0.477
  • 0.019
  • 0.229
  • 0
  • 7.24E-8
  • 0.257
  • 0
  • -0.0789
  • -184
  • 23.5
  • 1.06E+3
  • 0
  • 0.0000562
  • 0.782
  • 0
  • -207
Ozone Depletion Potential (ODP)
  • 0.0000131
  • 0
  • 0.0000192
  • 0
  • 0
  • 0.00000281
  • 0
  • 0.00000414
Photochemical Ozone Creation Potential (POCP)
  • 0.345
  • 0.0108
  • 0.00000258
  • 0
  • 2.99E-8
  • 0.0219
  • 0
  • 0.0923