Instytut Techniki Budowlanej
Data stock: published datasets [ Download ]

Process data set overview page

Data set: Copper fittings - K65 series (00.03.000)

Full name
Copper fittings - K65 series
Location
Reference year
2024
Valid until
2029
Reference flow(s)
Type
EPD
Parameterized?
no
LCIA results included?
yes
Category
Synonyms
Use advice for data set
The life cycle analysis of the declared products includes the production stage (modules A1 - A3) and modules A4, C1-C4+D ("from cradle to grave with options”) according to EN 15804 and ITB PCR A.
Data set use approval
General comment
The data for the LCA calculation of modules A1-A4 came from verified LCI inventory data from the plant. In accordance with Annex E of EN 15804 + A2, a data quality assessment was carried out. For technical representativeness, processes with a quality level of 'very good' represent 99% of the values for the climate change indicators. For geographical and temporal representativeness, a process evaluation level of "very good" was obtained. Production of goods takes place at the Poznan plant, from where they are sent to the Sady plant. Similarly, production takes place at the factory in Cordoba, from where the products are sent to Sady or directly to customers. In Sady, packaging of products, storage and shipping to customers takes place. At the Pensnett plant, storage and shipping to customers takes place. Inputs were inventoried for each production and storage facility. The allocation of impacts is based on the weight of K65 series products, which is a percentage of total production/sales and transport and represents: 1.62% at the Poznan site, 0.23% at theSady site, 7.2% at the Pensnett site and 4.30% at the Cordoba site. Allocation to a single, representative product was made on the basis of product weight. All raw material receipts are allocated in module A1. Production is based on copper, and waste from production is sold as scrap to other parties where it will be recycled. Module A2 includes the transport of semi-finished products between the production sites Poznan - Sady, Cordoba - Sady, Sady - Pensnett. Energy consumption, fuel consumption and waste were inventoried for the entire production process in module A3. 100% of input materials and 100% of electricity, natural gas, propane and diesel and water consumption were inventoried at the Poznan, Sady, Cordoba and Pensnett plants. All relevant parameters from the collected production data are included in the assessment, i.e. all materials consumed for production, packaging materials and utilities used, waste produced and emissions generated.
LCI Method Principle
LCI Method Approaches
No records found.
Completeness of product model
No statement
Reviews
  • Independent external review by
License and access conditions
Copyright
yes
License type
Free of charge for all users and uses
Access information
None
Owner of data set
IBP Instalfittings Sp. z o.o.
Technical purpose
Copper fittings (material type CW107C) for brazing are available in sizes 3/8'- 2 1/8". The K65 fittings manufactured from Wieland K65 tubes allow the installation of high-pressure refrigeration equipment up to 130 bar. The fittings are particularly suitable for use with CO2 (R-744) in transcritical applications, as the K65 alloy provides a mechanical strength high enough to withstand the required pressure values. The product is used in high-pressure air conditioning and high-pressure refrigeration applications. The table shows the range of copper fittings.
Input Products
No records found.
Co-Products
No records found.
Data set version
00.03.000
Time stamp (last saved)
2024-09-20T11:41:19
Data set format
Compliance systems
  • EN 15804+A2 (Overall compliance: Fully compliant)
  • ISO 14025 (Overall compliance: Fully compliant)
  • ISO 21930 (Overall compliance: Fully compliant)
Tag
Registered in
Process is not registered in any registry
Data Set deregistration
Are you sure you want to deregister selected dataset?
Please enter the reason of deregistration and confirm.