Process data set overview page

Data set: ArmaComfort® AB range (00.03.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name ArmaComfort® AB range

Location PL

Reference year 2025

Valid until 2030

Reference flow(s) ArmaComfort® AB range - 1.0 * 1.0 qm (Area)

Type EPD

Parameterized? no

LCIA results included? yes

Category

Synonyms

Use advice for data set The life cycle analysis (LCA) of the declared products covers: product stage – modules A1-A5, end of life – modules C1-C4 and benefits and loads beyond the system boundary – module D (cradle-to-gate with options) in accordance with EN 15804+A2 and ITB PCR A . Energy and water consumption, emissions as well as information on generated wastes were inventoried and were included in the calculations. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804+A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA.

Data set use approval

General comment The data selected for LCA originate from ITB-LCI questionnaires completed by Armacell and verified during data audit. No data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency is judged as very good. The background data for the processes come from the following resources database Ecoinvent v.3.11. Specific (LCI) data quality analysis was a part of the input data verification. The allocation rules used for this EPD are based on general ITB’s document PCR A (EN 15804+A2). Input and output data from the production is inventoried and allocated to the production on the mass basis. The declared product’s recipes were used for the calculations, based on specific substances included in the production. All materials and energy consumption inventoried in factory were included in calculation. Office impacts were not taken into consideration. In the assessment, all significant parameters from gathered production data are considered, i.e. all material used per formulation, utilised thermal energy, internal fuel and electric power consumption, direct production waste, and all available emission measurements.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Ph.D. Eng. Halina Prejzner

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Armacell Poland Sp. z o. o.

Technical purpose ArmaComfort multilayered products covered by this EPD (ArmaComfort AB, AB Plus and AB Alu Plus) are designed to mitigate noise from technical equipment in buildings, industrial environments, vehicles, and marine vessels. Armacell offers a complete range of acoustic insulation products with superior sound reduction qualities. ArmaComfort® AB range combines thin acoustic multilayer solutions with flexible acoustic barriers and different damping or insulation materials in one product with fire performance. These easy-to-install noise control solutions are especially suitable for insulating sanitary wastewater and rainwater pipes, and also fan coil and duct lagging. ArmaComfort AB ArmaComfort AB combines the acoustic performance of an excellent and flexible acoustic barrier of 2 mm thickness and 4 kg/m² of weight with a damping ArmaFlex flexible elastomeric foam of 9 mm. Euroclass of this acoustic multilayer: D-s2, d0. ArmaComfort AB Plus Multi-layer acoustic insulation material consisting of an acoustic EPM-EVA barrier of 2 mm thickness and a 9 mm thick elastomeric foam based on synthetic rubber. Euroclass of this acoustic multilayer: C-s2, d0. ArmaComfort AB Alu Plus Multi-layer acoustic insulation material consisting of an acoustic EPM-EVA barrier of 2 mm thickness with aluminum foil and a 9 mm thick decoupling elastomeric foam based on synthetic rubber. Euroclass of this acoustic multilayer: B-s1, d0. -

Input Products No records found.

Co-Products No records found.

Data set version 00.03.000

Time stamp (last saved) 2026-01-08T13:43:21

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Registered in

Process is not registered in any registry

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo