Process data set overview page

Data set: Aluminium foil, strip and sheet (00.03.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name Aluminium foil, strip and sheet

Location PL

Reference year 2026

Valid until 2031

Reference flow(s) Aluminium foil, strip and sheet - 1.0 * 1.0 kg (Mass)

Type EPD

Parameterized? no

LCIA results included? yes

Category

Synonyms

Use advice for data set The life cycle analysis of the declared product covers “Product Stage” A1-A3, A4-A5, C1-C4+D modules in accordance with EN 15804 and ITB PCR A (cradle to gate with options).

Data set use approval

General comment The data selected for LCA originate from ITB-LCI questionnaires completed by producer. No specific data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. The background data for the processes come from the following resources: database Ecoinvent v.3.11 and KOBIZE (Polish electricity mix and combustion factors for fuels). KOBIZE data is supplemented with Ecoinvent data on the national electricity mix impact where no specific indicator data is provided. Specific (LCI) data quality analysis was a part of the input data verification. The time related quality of the data used is valid (5 years). The allocation rules used for this EPD are based on general ITB PCR A. The results are the average representative of all aluminium alloys produced in Bogumilów. Averages are obtained through the weighted average. Allocation of impacts is done on product mass basis in both plants. All impacts from aluminium ingots production (and aluminium scrap processing) are allocated in A1 module (see Table 2). Minimum 99% of the impacts from a line production were allocated to the products covered by this declaration. Module A2 includes products specific transport of aluminium ingots to manufacturing plant. Municipal wastes of the factories were allocated to module A3. Emissions in the factories were assessed using Ecoinvent v3.11 data for energy carriers. Minimum 99% input materials and 100% energy consumption (electricity, gas, ON, heat) were inventoried in Bogumilów plants and were included in the calculation. In the assessment, all significant parameters from gathered production data are considered, i.e. all material used per formulation utilized thermal energy, and electric power consumption, direct production waste and available emission measurements. Tires consumption for transport was not taken into account. Substances with a percentage share of less than 1% of total mass were excluded from the calculations. It is assumed that the total sum of omitted processes does not exceed 0.5% of all impact categories. In accordance with EN 15804 machines and facilities required for and during production are excluded, as is transportation of employees.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Ph.D. Eng. Halina Prejzner

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set EUROMETAL S.A.

Technical purpose This declaration covers production of aluminium, foils, strips and sheets. Aluminum rolling mill in Bogumilów, which is a part of the Eko-Swiat Group, offers cold rolled coils manufactured according to the client’s requirements in terms of hardness, dimensions, properties and packaging. The range of service cover cold rolling, thermal processing, surface degreasing, giving the form (embossing - the orange peel), straightening by tension, slitting and cut to lenght. Company has also in the assortment coated products, both in the form of aluminum coils and sheets. All specific product technical data is available at manufacturer website, https://www.eko-swiat.pl/en -

Input Products No records found.

Co-Products No records found.

Data set version 00.03.000

Time stamp (last saved) 2026-07-30T10:51:49

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Registered in

Process is not registered in any registry

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo