|
General comment The data selected for LCA originate from ITB LCI questionnaires completed by BITNER. No specific data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. The database, Ecoinvent 3.9 is utilized for the background system (copper, plastics; EPR, EVA, PE, Mica, other). As a result, both upstream and downstream activities are based on average supply mixes for the specific region depending on the given dataset and KOBiZE data is used (Polish electricity mix and combustion factors for fuels). Specific (LCI) data quality analysis was a part of the input data verification. The time related quality of the data used is valid (5 years).
The allocation rules used for this EPD are based on general ITB’s document PCR A. In the modules A1 A3, material losses in the assembly of the products in the factory are defined on the averaged specific values for the site. I nput and output data from the production is inventoried and allocated to the cable production on the mass basis The declaration covers a wide range of products (averaged). Their production resources and processing stages are basically similar, so it is possible to average the production by product volume.
All data obtained from the survey at the solar glass supplier and module manufacturer were taken into consideration, all available data from production have been considered, i.e. all raw materials/elements used as per assembly process, utilized thermal energy, and electric power consumption. This material and energy flows contributing less than 1 % of mass or energy have been considered. It can be assumed that the total sum of neglected processes does not exceed 5 % of energy usage and mass per module A, B, C or D. Machines and facilities required during production are neglected. The production of etiquettes, tape and glue was also not considered
|
