Process data set overview page

Data set: Group of ECO LINE concretes (00.03.001)

Other versions:00.03.000

View entire data set

Download data set as XML file

Download as ZIP file

Full name Group of ECO LINE concretes

Location

Reference year 2023

Valid until 2028

Reference flow(s) Group of ECO LINE concretes - 1.0 * 1.0 m3 (Volume)

Type EPD

Parameterized? no

LCIA results included? yes

Category

Synonyms

Use advice for data set The EPD covers the product stage analysis A3, A4 + end of life C and D (“cradle to gate” with options). The selected system boundaries comprise the production of input raw materials’ extraction up to the finished product at the factory gate (ready concrete). The product stage contains: Module A1: extraction and processing of raw materials (ash, sand, gravel, additives, water, and cement) and fuels, Module A2: transportation up to factory gate of raw materials and primary fuels, Module A3: concrete production (mixing). Inputs and processes of product system are presented in Figure 1.

Data set use approval

General comment The values determined to calculate A1 (cement) and A3 originate from verified LCI inventory data from cement production plants (ITB-EPD) and 22 concrete production plants. A1 values (raw materials) were prepared considering specific data and Eco invent data for the aggregates and ashes. The allocation rules used for this EPD are based on general ITB PCR A and EN 15804. Each manufacturing plant was subjected to LCI data analysis. The values adopted for the calculations were averaged from 8 plants using a weighted average. As no co-products are produced, the flow of materials and energy and also the associated release of substances and energy into the environment are related exclusively to the concrete mix produced. Cement used is produced in Poland and the weighted average mass of CEM III/A 42,5N-LH/HSR/NA and CEM II A/V 42,5 production was used for allocation. Minimum 99.5% of impacts from the production were allocated to product covered by this declaration. Emissions allocated in cement production are assessed by ITB using EN 15804+A2 (specific EPDs). Calculations for GWP indicator are made considering gross emissions. The indicated gross value includes the CO2 emissions from waste incineration (excluding biomass fraction of fuels). In this assessment, all information gathered from data collection for the production of concrete has been modelled, i.e. all raw materials used, the electrical energy and other fuels used (oil and diesel), use of ancillary materials and all direct production waste. Transport data on input was considered. The machines and facilities (capital goods) required for and during production are excluded, as is transportation of employees. Calculations for GWP indicator are made considering gross emissions. The concrete recipe is based on weighted average data from 8 locations.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Ph.D. Eng. Halina Prejzner

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Budokrusz S.A.

Technical purpose Concrete is specified and supplied in accordance with EN 206 with Polish amendment PN-B-06265. Concrete is used for site-mixed structures, precast structures and structural precast products in buildings prefabricated structures and structural prefabricated products in buildings and buildings. The product assessed is a specific 1 m3 of mixed concrete, where the constituent proportions are provided in Table 1 based on average values from 8 plants. Ready-mixed concrete is commonly used in construction for: internal and external walls, roofs, foundations, piles, columns, supports, joists and other elements. More detailed information is available in the respective manufacturer's documentation (e.g. product data sheets available on request).

Input Products No records found.

Co-Products No records found.

Data set version 00.03.001

Time stamp (last saved) 2023-05-25T14:57:16

Data set format

Other versions 00.03.000

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Registered in

Process is not registered in any registry

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo