Process data set overview page

Data set: Chambers, manholes and polypropylene (PP) systems for sewerage and drainage (00.03.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name Chambers, manholes and polypropylene (PP) systems for sewerage and drainage

Location PL

Reference year 2025

Valid until 2030

Reference flow(s) Chambers, manholes and polypropylene (PP) systems for sewerage and drainage - 1.0 * 1.0 kg (Mass)

Type EPD

Parameterized? no

LCIA results included? yes

Category

Synonyms

Use advice for data set The life cycle analysis (LCA) of the declared products covers: product stage – modules A1-A5, end of life – modules C1-C4 and benefits and loads beyond the system boundary – module D (cradle to grave) in accordance with EN 15804+A2 and ITB PCR A . Energy and water consumption, emissions as well as information on generated wastes were inventoried and were included in the calculations. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804+A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA.

Data set use approval

General comment The data selected for LCA originate from ITB-LCI questionnaires completed by PIPELIFE Polska S.A. and verified during data audit. No data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency is judged as good. The background data for the processes come from the following resources database Ecoinvent v.3.10. Specific (LCI) data quality analysis was a part of the input data verification. The allocation rules used for this EPD are based on general ITB PCR A. Production of the polypropylene (PP) pipes and fittings for low-noise soil system is a line process conducted in factory of PIPELIFE Polska S.A. located in Kartoszyno and Strzalków (Poland). Allocation was done on product mass basis. All impacts associated with the extraction and processing of raw materials used for the production of the declared product are allocated in module A1 of the LCA. Impacts from the global line production of PIPELIFE Polska S.A. were inventoried and 100% were allocated to production. Water and energy consumption (electrical grid, diesel and LPG), associated emissions and generated wastes are allocated to module A3. Packaging materials were taken into consideration. Minimum 99.0% input materials and 100% energy consumption (electricity, diesel, LPG) were inventoried in a processing plant and were included in the calculation. In the assessment, all available data from production have been considered, i.e. all raw materials/elements used as per formulation process, utilized thermal energy for heating, and electric power consumption. Thus, material and energy flows contributing less than 1 % of mass or energy have been considered. It can be assumed that the total sum of neglected processes does not exceed 1 % of energy usage and mass per modules A or D. Machines and facilities required during production are neglected. The packaging products (plastic bags, stretch, pallets, cardboard packaging, etc.) are included.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Ph.D. Eng. Halina Prejzner

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set PIPELIFE Polska S.A.

Technical purpose Pipes, fittings, chambers and manholes for sewerage and drainage are made of polypropylene (PP) and are recyclable: Pragma pipes, DW: SN 8, SN 10, SN 12, SN 16, DN/OD: 110, 160, 200, 250, 315, 400, 500, 630 Pragma fittings, DN/OD: 110, 160, 200, 250, 315, 400, 500, 630 Pragma+ID pipes, DW: SN 8, SN 10, SN 12, SN 16, DN/ID: 200, 250, 300, 400, 500, 600, 800, 1000 Pragma+ID fittings, DN/ID: 200, 250, 300, 400, 500, 600, 800, 1000 Pragma and Pragma+ID drainage pipes, double-wall (DW) and single-wall, perforated (TP, LP, MP), with or without geotextile, SN 8, SN 10, SN 12, SN 16; DN/OD: 110, 160, 200, 250, 315, 400, 500, 630; DN/ID: 200, 250, 300, 400, 500, 600, 800, 1000 Pipes for infiltration of treated wastewater from wastewater treatment plants: DN/OD: 110 Solid-wall polypropylene fittings for sewerage: DN 110, 125, 160, 200, 250, 315, 400, 500 Solid-wall polypropylene MASTER fittings for sewerage: DN 110, 125, 160, 200, 250, 315, 400, 500 Chambers PRO 200, PRO 315, PRO 400, PRO 425: DN: 200, 315, 400, 425 Manholes PRO 630, PRO 600: DN: 630, 600 Manholes PRO 800, PRO 1000: DN: 800, 1000 Chambers based on pipes: Pragma DN/OD 500, 630 and DN/ID: 500, 600, 800, 1000 Drainage chambers: DN 315, 400, 425, 630 Fabricated drainage chambers based on pipes: Pragma DN/OD 400, 500, 630 and DN/ID 500, 600, 800, 1000 Road gully DN 400 with outlets DN: 110, 125, 160, 200 All additional technical information about the product is available on the manufacturer's website. -

Input Products No records found.

Co-Products No records found.

Data set version 00.03.000

Time stamp (last saved) 2025-07-22T15:36:46

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Registered in

Process is not registered in any registry

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo