|
Owner of data set IBP Instalfittings Sp. z o.o. |
Technical purpose >B<Press press fittings are made of copper and copper aloys. They ensure a secure and durable connection suitable for numerous applications, such as: drinking water systems, water heating systems, district heating systems, solar thermal systems, water cooling systems and rainwater systems. The >B<Press press fittings do not require soldering - they are designed with an innovative 3-point press system to ensure a leak-free, secure and permanent joint. The fittings with dimensions from 64 to 108 mm additionaly have a stainless steel clamping ring which strengthens the connection even more effectively.
>B<Press series P4000, P5000 and P XL press fittings
>B<Press series P4000, P5000 and P XL products are press fittings made of copper (series P4000) or bronze (series P5000, P XL) . They are designed for making connections on copper pipes, complying with EN 1057, in water supply and water heating installations. The diameter of the press fittings varies from 12 mm to 108 mm.
The >B<Press fittings are available with male and female threads according to the following standards:
- connection threads in accordance with EN 10226-1 (ISO 7-1),
- clamping threads in accordance to ISO 228 - cylindrical.
The press fittings are sealed with a black o-ring made of EPDM material. The O-ring has a PI (Press Indicator) function to indicate "leakage before pressing". The above-mentioned O-ring has two constrictions which make it possible to detect leaks (during the pressure test) at low pressure (0.1 to 6.0 bar) in the absence of pressing. This indicator applies to fittings with diameters of 12 - 54 mm.
Fittings with diameters from 64 to 108mm have a sticker indicating whether the fitting is pressed - once pressed, the installer must peel the sticker off the joint.
The connection is made by press-fitting with B-profile jaws (diameter up to 54 mm) or V-profile jaws (diameter from 64 to 108 mm).
The advantage of >B<Press fittings is the 3-point pressing (one on each side of the notch and one pressing on the notch with an O-ring) which ensures a permanent and secure connection. The press fittings are assembled using a press tool with press jaws. The size of the jaws is matched to the diameter of the fittings. During pressing, the jaw closes to form a permanent connection.
>B<Press Gas series P4000 and P5000 press fittings
>B<Press Gas series PG4000 and PG5000 products are press fittings made of copper (series PG5000) or bronze (series PG4000). They are designed for making connections on copper pipes, complying with EN 1057, in gas and gaseous fuel installations.The diameter of the connectors varies from 12 mm to 54 mm.
The >B<Press Gas fittings are available with male and female threads according to the following standards:
- connection threads in accordance to EN 10226-1 (ISO 7-1),
- clamping threads in accordance to ISO 228 - cylindrical.
The press fittings are sealed with a yellow O-ring made of HNBR material. The O-ring has a PI (Press Indicator) function to indicate "leakage before pressing". The above-mentioned O-ring has two constrictions which, if not pressed, allow the detection of leaks.
The connection is made by pressing with B-profile jaws.
The advantage of >B<Press fittings is the 3-point pressing (one on each side of the notch and one pressing on the notch with an O-ring) which ensures a permanent and secure connection. The press fittings are assembled using a press tool with press jaws. The size of the jaws is matched to the diameter of the fittings. During pressing, the jaw closes to form a permanent connection.
>B<Press Solar series P4000 and P5000 press fittings
>B<Press Solar series PH4000 and PH5000 products are press fittings made of copper (series PH5000) or bronze (series PH4000). They are designed for making connections on copper pipes, complying with EN 1057, in water supply systems, water heating systems and solar thermal systems. The diameter of the connectors varies from 12 mm to 54 mm.
The >B<Press fittings are available with male and female threads according to the following standards:
- connection threads in accordance to EN 10226-1 (ISO 7-1),
- clamping threads in accordance to ISO 228 - cylindrical.
The press fittings are sealed with a green O-ring made of FKM material. The O-ring has a PI (Press Indicator) function to indicate "leakage before pressing". The above-mentioned O-ring has two constrictions which, if not pressed, allow the detection of leaks.
The connection is made by pressing with B-profile jaws.
The advantage of >B<Press fittings is the 3-point pressing (one on each side of the notch and one pressing on the notch with an O-ring) which ensures a permanent and secure connection. The press fittings are assembled using a press tool with press jaws. The size of the jaws is matched to the diameter of the fittings. During pressing, the jaw closes to form a permanent connection. |
